Dive Plane Kit - GR / GV Subaru WRX/STI




Collections: Body

Product type: Dive Plane Kit - GR / GV Subaru WRX/STI

Vendor: Verus Engineering

Tags: 2008 sti, 2008 wrx, 2009 sti, 2009 wrx, 2010 sti, 2010 wrx, 2011 sti, 2011 wrx, 2012 sti, 2012 wrx, 2013 sti, 2013 wrx, 2014 sti, 2014 wrx, dive, gr, gv, kit, plane, sti, subaru, wrx




The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving the front splitter further forward. The dive planes are able to be installed with 3M VHB tape or bolts and nuts.  Paper templates are included to ensure proper install location is achieved for maximum benefits.

Utilizing state-of-the-art analysis software during the R&D process, we were able to extract more performance for the given build volume; increasing downforce generated from the dive planes. We designed these units using scan data obtained internally; ensuring an OE like fit and finish on the units.

The dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser.


  • Dive Plane, Right-Hand

  • Dive Plane, Left-Hand

  • 3M VHB Double-Sided Tape, Cut to Dive Plane Shape (2)

  • Install Template (2)

  • Hardware Kit, Includes All Hardware Necessary for Install








Reduce Lift (Increase Downforce)

Shift Aero Balance Forward

Allows for Fine Tuning of Aero Balancing (Forward Biased)

Help Seal Sides of Car

Evacuate Air From the Front Wheel Well



 CFD Optimized Design



Pre-Preg, Autoclave Cured, Carbon Fiber Composition




Stainless Hardware Used Throughout 






Dive planes, when designed properly, can increase front end grip and corner speed through improving front end downforce and reducing lift in other areas of the vehicle. We utilized OpenFOAM CFD software to improve the performance of our dive plane kit.

The dive planes are part of the Ventus 1 and 2 packages for the GR / GV WRX/STI. The Verus Engineering Ventus 1 package adds a slight bump in downforce over the factory with minimal drag impact; while the Ventus 2 kit kicks that up a notch and dramatically increases downforce with a bit of added drag. We developed the Ventus 2 kit to provide a safe aerodynamic balance at speed to ensure safety and improved handling at high rates of speed. The Verus Engineering Ventus 2 package helps the GR/GV WRX get more from the tires at the track as well as improved confidence on the street. The Ventus 2 package is more geared towards a track car, but can still be utilized on a daily.