Fender Rolling Service

This service provides additional wheel clearance for lowered vehicles and/or vehicles with larger/wider wheel fitment.

1 x Wheel/Fender - $60/Hour
(Front or Rear of the vehicle / 1 corner only)

2 x Wheel/Fender - $120/Hour (Front or Rear of the vehicle)

4 x Wheel/Fender - $200/Hour (All 4 corners of the vehicle)

Eastwood Fender Roller

Procedure and Equipment:

  • Seven Automotive uses the industry standard Eastwood Fender Rolling tool to provide a safe and clean results.
  • During the rolling procedure heat is applied to the vehicles paint to allow "flex" while pressure is applied.
  • Fender Rolling is vinyl / wrap safe and can be applied at any time.
  • Fender Rolling is not "Plastidip" safe and in some cases will cause the body work to warp/peel during the service

Eastwood Fender Roller

What can you expect from this service:

  • Vehicle fender/quarter panel inner lip will be rolled "flush" inwards against the inner body panel.
  • Some vehicle designs require post-rust proofing services to protect against corrosion
  • *This service comes with no guarantees and is at your own risk due to the nature of this service.
  • In some rare cases paint may crack during the service and we recommend purchasing a touch-up pen/stick from the dealer.

Eastwood Fender Roller

What not to expect:

  • This is a "roll" service not "pulling or stretching" if you require more then rolling then paint/body damage will occur.
  • This service can only "roll" the inner lip inwards all the way flush to provide maximum inner fender clearance.
  • If your vehicle has any of the following "rust, body repair, repaint, peeling clear coat, etc" this service is not recommended and will most likely damage your vehicle. .

Contact us today

Phone: 905-729-3344 GTA: 647-693-4948


Address & Location

3763 10th Side Road Beeton / New Tecumseth Ontario, L0G 1A0

View on Google Map